TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 106 of 1555

TM

9-2320-387-24-2

1 10-54.

BODY HINGE MOUNT REPLACEMENT

I

This task covers:

a.

Removal

b.

Installation

INITIAL

SETUP:

Applicable

Models

Ml113

Manual References

TM 9-2320-387-24P

TOOIS

%&era1 mechanic’s tool hit:

Maintenance

Level

Unit

automotive (Appendix B, Item 11

NOTE

Perform step

1

for upper front body hinge removal.

1.

Remove two nuts (11, washers (21, twelve-point screws (51, washers (41, and upper front body hinge

mount (3) from body (6).

NOTE

Perform step 2 for lower front body hinge removal.

2.

Remove two twelve-point screws (9), washers (81, and lower fkmt body hinge mount (71 from body (6).

-1

NOTE

Perform step 1 for lower front body hinge mount installation.

1.

Install lower body hinge mount (71 on body (6) with two washers (8) and twelve-point screws (91.

Tighten twelve-point screws (91 to 8 lb-R (11 N-m).

NOTE

Perform step 2 for upper front body hinge installation.

2.

Install upper body hinge mount (3) on body (61 with two washers (41, twelve-point screws (51,

washers (2), and nuts (1). Tighten twelve-point screws (51 to 8 lb-R (11 Nom).

1

O-89