TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1060 of 1555

TM 9-2320-387-24-2

28-3.

TRANSMISSION

DISASSEMBLY

INTO SUBASSEMBLIES (Cont’d)

1. Turbine Shaft and Overdrive

Carrier Assembly

Removal

I

1.

Lift turbine shaft. (1) and remove overrun clutch housing assembly (10) from transmission case (7).

CAUTION

Correct torque for installed fourth clutch bolt should be

133 lb-in. (15 N-m). If not tightened to minimum torque, check case

for cracks and damaged threads. Replace case if damaged.

2.

Check fourth clutch bolt (12) torque for a minimum of 133 lb-in. (15 N=m).

3.

Remove bolt (12) from fourth clutch housing (11) with torx adapter. Discard bolt (12).

4.

Remove fourth clutch housing (11).

28-15