TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1084 of 1555

28-9. CENTER SUPPORT REPAIR (Cont'd)

TM 9-2320-387-24-2

Change 1

28-35

CAUTION

All transmission parts must be lubricated with clean transmission

fluid (Dexron® III) before assembly. Foreign material will cause

transmission damage.

NOTE

• For general assembly instructions, refer to para. 2-17.

• It may be necessary to use a 0.015-in. (0.381-mm) feeler gauge

to start outer and inner piston seals into center support.

1.

Install inner piston seal (8) and outer piston seal (9) on clutch piston (7). Ensure lips on piston

seals (8) and (9) face away from spring pockets in clutch piston (7).

2.

Install clutch piston (7) in center support (3), indexing spring pockets in clutch piston (7) with cored

areas in center support (3).

d. Assembly

7

3

8

9