TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 1466 of 1555

Change 1

D-84.5

TM 9-2320-387-24-2

Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont‘d)

Figure D-106. Instuctions for Parking Brake Spring Tool.

ASSEMBLY INSTRUCTIONS:

1. Position bar (2) across parking brake spring (4) and install on parking

brake lever (5) using

NSN 5305-00-725-2317 screw (1) and NSN 5310-00-761-0654 nut (6).

2. Install NSN 5305-00-068-0515 screw (3) in bar (2).

3. Remove parking brake spring (4) from parking brake lever (5) and caliper housing (7) by turning

bar (2) clockwise.

4. Remove nut (6), screw (1), and bar (2) from parking brake lever (5).