TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 366 of 1555

11-86. CONDENSER FAN ACCESS PANEL MAINTENANCE

This task covers:

a. Removal

c.

Installation

b. Inspection

1.

Remove three capscrews (9), washers (8), and bracket (7) from access panel (2).

2.

Remove capscrew (9.1) and washer (9.2) from access panel (2).

3.

Remove three self-tapping screws (4), washers (3), and access panel (2) from condenser tray (11) and

cargo shell (1).

4.

Remove two screws (6) and footman loop (5) from access panel (2).

Refer to para. 10-56 for plusnut (10) inspection and replacement.

1.

Install footman loop (5) on access panel (2) with two screws (6).

2.

Install access panel (2) on condenser tray (11) and cargo shell (1) with three washers (3) and

self-tapping screws (4).

3.

Apply sealing compound to threads of capscrews (9), and install bracket (7) on access panel (2) with

three washers (8) and capscrews (9). Tighten capscrews (9) to 10 lb-ft (14 N

•

m).

4.

Apply sealing compound to threads of capscrew (9.1), and install washer (9.2) and capscrew (9.1) on

access panel (2). Tighten capscrew (9.1) to 10 lb-ft (14 N

•

m).

c. Installation

b. Inspection

a. Removal

INITIAL SETUP:

Applicable Models

M1114

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Maintenance and repair shop equipment:

automotive (Appendix B, Item 2)

Manual References

TM 9-2320-387-24P

Materials/Parts

Sealing compound (Appendix C, Item 72.1)

Equipment Condition

• Condenser fan exhaust vents removed

(para. 11-85).

• Cargo shell door gas spring mounting bracket

removed (para. 11-29).

Maintenance Level

Unit

TM 9-2320-387-24-2

11-154

Change 1