TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 411 of 1555

TM

9-2320-387-24-2

t

12-22. REAR ANTENNA MOUNTING BRACKET REPLACEMENT

I

Thii task covers:

a.

Removal

INITIAL SETUP:

b.

Installation

Applicable

Models

Ml113

TOOIS

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Special Tools

Manual References

TM 9-2320-387-24P

Equipment

Condition

l

AS 1729/VRC antenna removed (para. 12-211,

if installed.

l

AB-652/GR antenna removed (para. 12-231,

if installed.

Crowfoot, 3/B-in. (Appendix B, Item 142)

Socket adapter, 3/8-in. (Appendix B, Item 135)

M:ztenance Leve’

Materials/Parts

Three locknuts

(Appendix G, Item 179)

1

a. Removal

1

1.

Remove grommet (3) from body (1).

NOTE

Note

position of washers and clamp for installation.

2.

Remove three locknuts (B), washers (7), capscrews (41, washers (51, antenna mounting bracket (21,

and clamp (6) from body (1). Discard

~OC~IU~S

(8).

b. Installation

1.

Install antenna mounting bracket (2) and clamp (6) on body (1) with three washers (51,

capscrews (4), washers (71, and locknuts (8). Using crowfoot, tighten locknuts (8) to 15 lb-ft (20 Nem).

-2.

Install grommet (3) on body (1).

FOLLOW-ON TASKS:

l

Install AS 1729NRC antenna (para. 12-211, if removed.

l

Install AB-652/GR antenna (para. 12-23), if removed.

12-38