TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 656 of 1555

TM 9-2320-387-24-2

I

15-28.

ENGINE INSTALLATION

(Cont’d)

I

125.

Install hood (1) and align two upper hinge halves (5) with lower hinge halves (4).

126.

Install two

upper hinge

halves (5) on lower hinge halves (4) with washers (3), hinge Pins (6L

washers (3), and cotter pins (2).

127.

Install hood

prop rod (7) and

bracket

(11)

on airlift bracket (8) with

four lo&washers

(12) and

screws (13). Tighten screws (13) to 6 lb-ft (8 Nom).

128.

Install two seals

(10)

and cover plates (9) on airlift

brackets

(8).

129.

Connect

hood

harness connector (14) to harness

connector

(15).

15-124