TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 676 of 1555

TM 9-2320-387-24-2

16-8. FUEL INJECTION PUMP SHUTOFF SOLENOID MAINTENANCE

This task covers:

a.

Removal

b.

Inspection

c.

Installation

INITIAL SETUP:

Tools

General

mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Three lockwashers (Appendix G, Item 1981

Locknut (Appendix

G,

Item 1601

Two

fiber washers (Appendix G, Item 501

Manual

References

TM 9-2320-387-24P

Equipment Condition

Fuel injection pump cover removed (para. 16-71.

Maintenance

Level

Direct support

NOTE

Working area should be clean, well-ventilated, and free from

blowing dirt and dust.

rxzzl

1.

Remove terminal (51, washer (61, and shell (7) from stud (12).

2.

Remove nut (81, lockwasher (91, washer (lo), and fiber washer (11) from stud (12). Discard

lockwasher (9) and fiber washer (111.

3.

Remove locknut (41, ground strap (3), lockwasher (21, nut (81, lockwasher (91, washer (lo), and fiber

washer (11) from stud (14). Discard locknut (4), lockwashers (2) and (9), and fiber washer (11).

4.

Remove electrical shutoff solenoid (13) from cover (11.

I[

Inspect shell (7). Replace if cracked, deteriorated, or damaged.

c.

Installation

1.

Install electrical shutoff solenoid (13) in cover (1).

2.

Install fiber washer (111, washer (101, lockwasher (91, nut (81, lockwasher (2), ground strap (31, and

locknut (4) on stud (14).

3.

Install fiber washer (111, washer (lo), lockwasher (91, and nut (81 on stud (12).

4.

Install shell (71, washer (61, and terminal (5) on stud (121.

16-16