TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 731 of 1555

TM 9-2320-387-24-2

1 18-6. ENGINE WIRING HARNESS REPLACEMENT (Cont’d)

1

14.

Remove two screws (141, clamps (151, and harness (16) from brackets (23).

15.

Remove nut (18), lockwasher (191, washer (201, ground lead (211, and washer (20) from stud (22).

Discard lockwasher (19).

16.

Remove nut and lockwasher assembly (271, capscrew (24), clamp (251, and harness (16) from dipstick

mounting bracket (26). Discard nut and lockwasher assembly (27).

17.

Disconnect four harness leads (29) from glow plugs (28).

18.

Disconnect two harness connectors (30) from water temperature sending unit (17).

18-37