TM-9-2320-428-10

TRUCK, CARGO, 8X8, M977

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

  TM-9-2320-428-10 - Page 423 of 1072

INSTALL TIRE CHAINS - Continued
Figure 3.
5.
With aid of an assistant, connect and secure inside and outside clamps (4) so tire
chain (1) is as tight as possible.
6.
With aid of an assistant, repeat Steps (1) through (5) on remaining tires of No. 3 and
No. 4 axles.
7.
Drive vehicle forward (WP 0050) about 15 ft. (4.6 m) and then drive vehicle in reverse
(WP 0051) about 15 ft. (4.6 m) as guided by assistant.
8.
Park vehicle. (WP 0056)
NOTE
Tire chains on No. 3 and No. 4 axle tires are all tightened up the same.
Passenger side No. 4 axle shown.
9.
With aid of an assistant, disconnect inside clamp (4) of tire chain (1) on tire (3).
TM 9-2320-428-10
0083
0083-3


Back to Top