TM-9-2320-428-10

TRUCK, CARGO, 8X8, M977

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-428-10 - Page 435 of 1072

OPERATOR MAINTENANCE

SELF-RECOVER VEHICLE USING SELF-RECOVERY WINCH

INITIAL SETUP:

Personnel Required

Operator and Assistant - - - (2)

WINCH MIRED VEHICLE FORWARD

NOTE

•

For additional information on vehicle self-recovery, refer to FM

4-30.31. (WP 0161)

•

Vehicle self-recovery is a two soldier task. Soldiers must

communicate by hand signals.

1.

Shut off engine. (WP 0057)

2.

Adjust mirror (1) so assistant can be clearly seen during procedure.

Figure 1.

CAUTION

PTO ENGAGE switch must be in OFF position before moving hydraulic

selector valve control to prevent equipment damage.

3.

Set PTO ENGAGE switch (2) to OFF position. Indicator light (3) will go out.

TM 9-2320-428-10

0086

0086-1