TM-9-2320-428-10
TRUCK, CARGO, 8X8, M977
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-428-10 - Page 816 of 1072
Table 1.
PMCS - AFTER - Continued
Item
No.
Interval
Item to
be
Checked
or
Serviced
Procedure
Equipment
Not Ready/
Available If:
2.
Check appearance of hydraulic
fluid in sight glass. Make sure it is
clear and not milky or foamy.
Fluid ap-
pears milky
or foamy.
3
After
Driver
Side
Wheels
1.
Check wheels for broken,
cracked, and bent surfaces.
Wheel is
broken,
cracked, or
bent.
2.
Check lugnuts and wheel studs
for obvious looseness and
damage. If loose, tighten and
report to maintenance as soon as
practical.
Two or
more lug-
nuts or
studs on the
same wheel
are missing,
broken, or
bent.
4
After
Driver
Side
Shock
Absorber
s
Check driver side shock absorbers
for leaks and damage.
Damaged
or Class III
leak
present.
5
After
Crane
Control
Knobs
Check all crane control knobs to
make sure information on knobs is
legible.
Information
on crane
control
knobs is not
legible.
6
After
Rear
Exterior
Check rear of vehicle for obvious
damage that would impair operation.
Any dam-
age that
would im-
pair opera-
tion.
TM 9-2320-428-10
0147
0147-6
Back to Top
