TM-9-2320-428-10
TRUCK, CARGO, 8X8, M977
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-428-10 - Page 888 of 1072
Table 1.
PMCS - WEEKLY - Continued
Item
No.
Interval
Item to
be
Checked
or
Serviced
Procedure
Equipment
Not Ready/
Available If:
JACK
CYLINDER
RH O/R
JACK CONTROL
LEVER
O/R EXT
CONTROL LEVER
LH O/R
JACK CONTROL
LEVER
HOIST
CONTROL LEVER
RETAINING PINS
RETAINING PINS
OUTRIGGER
PAD
Figure 22.
b.
Place both outrigger lockpins
in unlock position.
c.
Check each control
separately for malfunction,
proper response, obvious
damage, missing parts,
binding, and extreme
looseness.
Controls
malfunction,
bind, or do
not re-
spond.
d.
Move O/R EXT lever to OUT
position until both outriggers
is completely extended.
Outrigger
beam does
not come
out.
e.
Set up outrigger pads. Check
that two retaining pins are
Retaining
pin missing
TM 9-2320-428-10
0148
0148-34
Back to Top
