TM-9-2320-429-10
TRUCK, TANK, 8X8, M978
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-429-10 - Page 15 of 1096
WARNING
MOVING MACHINERY
•
Use extreme care when operating or working near moving machinery
including running engine, rotating shafts, and other moving parts.
Failure to comply may result in injury or death to personnel.
•
Use extreme care when measuring voltage while engine is running.
Avoid contact with rotating fan blade and hot engine parts. Failure to
comply may result in injury or death to personnel.
WARNING
TANKER OPERATION
•
Equipment operation is allowable with minor leakages (Class I) or
(Class II). Consideration must be given to the field capacity in the
item/system being checked/inspected. When in doubt notify
supervisor. When operating with Class I or II leaks, continue to check
fluid levels as required in the PMCS.
•
or (Class III) leaks should be repaired per applicable procedure.
•
All winching performed in this procedure must be with engine at low
idle. Failure to comply may result in damage to equipment.
•
Use care when removing nozzles. Failure to comply may result in
damage to equipment.
TM 9-2320-429-10
m
Back to Top
