TM-9-2320-429-10

TRUCK, TANK, 8X8, M978

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-429-10 - Page 384 of 1096

POSITION TANKER CONTROLS - Continued

16

FLAMMABLE

NO SMOKING WITHIN 50 FE T

Figure 5.

BONDING AND GROUNDING

NOTE

•

Bonding is the process of electrically connecting two units to equalize

and form a path for any static potential that might develop during

fueling process. Grounding is the process of electrically connecting

single or bonded units to ground rods. This discharges into the earth

any static potential that might exist at the beginning of operation or

that might develop during the operation.

•

Both vehicles and equipment involved must be bonded and grounded

before performing fueling procedures.

•

If you use only one ground rod to ground both vehicles, you do not

need to bond.

1.

Connect SR1 and SR2 static cables (1) to grounding devices and vehicle being

serviced.

TM 9-2320-429-10

0084

0084-6