TM-9-2320-429-10

TRUCK, TANK, 8X8, M978

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-429-10 - Page 677 of 1096

OPERATOR MAINTENANCE

PERFORM FUEL SERVICING USING AUXILIARY PUMP

INITIAL SETUP:

Not Applicable

PREPARATION

WARNING

To prevent fire or explosion, do not allow smoking, flame, sparks, and hot

or glowing objects within 50 ft. (15 m) of vehicle. Read and follow all safety

precautions in FM 10-67-1. Failure to comply may result in injury or death

to personnel.

NOTE

•

This procedure should be used to perform fuel servicing of land

vehicles when tanker primary pump cannot be used. Whenever

possible, use tanker primary pump for fuel handling operations.

•

Refer to FM 10-67-1 for general operating instructions for tanker

vehicles.

•

If equipment malfunctions, check that all steps of procedure have

been performed in proper sequence. If equipment still malfunctions,

perform troubleshooting.

1.

If primary pump is inoperative, notify field level maintenance as soon as possible.

2.

Prepare tanker for operation. (WP 0084)

3.

Connect SR1 and SR2 static cables (1) to grounding devices and vehicle being

serviced.

////////////////////////////////////////////////////////////////////////////////////

TM 9-2320-429-10

0114

0114-1

////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////