TM-9-2320-429-10

TRUCK, TANK, 8X8, M978

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

  TM-9-2320-429-10 - Page 947 of 1096

Table 1.
PMCS- SEMIANNUAL - Continued
Item
No.
Interval
Item to
be
Checked
or
Serviced
Procedure
Equipment
Not Ready/
Available If:
SPRING
HANGER
PIN LUBE
FITTING
SPRING HANGER
SPRING
HANGER
Figure 5.
2. If spring hanger pin does not
accept grease, perform the
following:
a. Relieve load on spring
hanger pin by jacking up
vehicle at frame rails, as
close to spring hanger pin as
possible.
b. Lubricate spring hanger pin
pivot.
TM 9-2320-429-10
0146
0146-11


Back to Top