TM-9-2320-429-10

TRUCK, TANK, 8X8, M978

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

  TM-9-2320-429-10 - Page 997 of 1096

PREPARE VEHICLE FOR TOWING - Continued
2.
Perform the following on disabled vehicle:
a.
Remove propeller shaft between transfer case and No. 3 axle.
b.
Install axle restraint chains (1):
3
2
1
4
Figure 2.
NOTE
Axle restraint chains are installed the same way, driver side
shown.
No. 2 axle should be restrained with chains on both sides of
vehicle.
(1)
Route axle restraint chain (1) under engine shroud (2), over frame rail (3),
and around axle (4).
(2)
Hook axle restraint chain (1) back into itself as shown.
(3)
Repeat Steps (1) and (2) for opposite side of No. 2 axle (3).
END OF TASK
TM 9-2320-429-10
0150
0150-3


Back to Top