TM-9-2320-430-10
TRUCK, TRACTOR, 8X8, M983
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-430-10 - Page 373 of 868
WINCH MIRED VEHICLE FORWARD - Continued
•
When pulling cable through tensioning device, push sheave towards
frame rail to allow clevis to pass through.
15.
Pay out cable (9) while assistant pulls cable (9) until it is 6 in. to 1 ft. (15 cm to 30 cm)
past the front roller guide (12).
13
9
13
M977 SHOWN
15
14
9
12
Figure 8.
16.
Stop paying out cable (9).
17.
Assistant routes cable (9) through cable guide (13), over sheave (14), between roller
(15), and side of cable guide (13).
18.
Pay out winch cable (9) as assistant routes cable over first axle and 1 ft. (30 cm) past
front roller guide assembly (12).
TM 9-2320-430-10
0082
0082-7
Back to Top
