WINCH MIRED VEHICLE FORWARD - Continued
CAUTION
Do not reel in winch cable too tightly. If too much tension is applied, cable
or tie down ring can break, or winch may be damaged.
76.
Once assistant and all other personnel are clear of area, move winch shift lever (4) to
IN and take all slack out of winch cable (9).
77.
When winch cable (9) is tight, release winch shift lever (4) to center position.
78.
Set PTO ENGAGE switch (2) to OFF position. Indicator light (3) will go out.
79.
Shut off engine. (WP 0052)
80.
Push in hydraulic selector valve control.
HYDRAULIC SELECTOR
VALVE CONTROL
Figure 18.
81.
Adjust mirror (1) for driving.
TM 9-2320-430-10
0082
0082-21