TM-9-2320-430-10
TRUCK, TRACTOR, 8X8, M983
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-430-10 - Page 444 of 868
FIFTH WHEEL ASSEMBLY CONSIDERATIONS IN SANDY CONDITIONS
NOTE
Clean and re-lubricate fifth wheel parts more often when vehicle is
operated in sandy or dusty conditions. Lubricate daily under severe
operating conditions (refer to PMCS - weekly procedures (WP 0129) for
more information).
1.
Continuously clean sand deposits from fifth wheel components.
PARK VEHICLE
1.
Park vehicle as follows:
a.
Vehicle should not face into wind.
b.
Clean mud off vehicle as soon as possible.
CAUTION
•
Do not hit axle breathers when cleaning mud from axles.
•
Do not direct high pressure water stream at glass surfaces, seals, air
intake, axle breathers, exhaust outlet, or any other component of
vehicle that could be easily damaged by high pressure water stream.
2.
Clean mud from wheels, brakes, axles, universal joints, steering mechanism, and
radiator as soon as possible.
3.
Make sure axle breather vent caps move freely on breather body.
END OF TASK
END OF WORK PACKAGE
TM 9-2320-430-10
0089
0089-4
Back to Top
