TM-9-2320-430-10

TRUCK, TRACTOR, 8X8, M983

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-430-10 - Page 755 of 868

OPERATOR MAINTENANCE

LUBRICATION INSTRUCTIONS

INITIAL SETUP:

Not Applicable

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give

off harmful vapors, and are harmful to skin and clothing. Keep away from

open fire and use in well-ventilated area. If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and

water. Failure to comply may result in injury or death to personnel.

NOTE

•

The lowest level of maintenance authorized to lubricate a specific

point is indicated by where that lubrication point falls within the PMCS

tables. Operator/crew are only authorized to lubricate those points

within the operator PMCS tables. Field level maintenance personnel

are authorized to lubricate all points regardless of which tables

(operator or field level) those lubrication points are listed.

•

Refer to PMCS tables for specific lubrication points and localized

views.

•

Lubrication intervals are for normal operating conditions. Intervals

may be shortened as required for severe operating conditions.

•

Clean all lubrication points with cleaning compound, solvent and

allow to dry prior to servicing.

•

When using a grease gun, apply lubricant to the fitting until clean

lubricant squeezes out of the part being lubricated.

•

After a thorough high pressure washing, lubricate all grease fittings

and oil can points outside and underneath vehicle.

TM 9-2320-430-10

0132

0132-1