TM-9-2320-430-10

TRUCK, TRACTOR, 8X8, M983

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-430-10 - Page 779 of 868

OPERATOR MAINTENANCE

CHANGE WHEEL AND TIRE ASSEMBLY

INITIAL SETUP:

Tools and Special Tools

Chocks, Wheel (2) (WP 0143, Table 3,

Item 6)

Extension, Handle (WP 0143, Table 3,

Item 10)

Handle, Wrench (WP 0143, Table 3,

Item 11)

Jack, 12-ton, With Handle (WP 0143,

Table 3, Item 14)

Jack, Base Plate (WP 0143, Table 3,

Item 17)

Tools and Special Tools - Continued

Warning Device Set, Triangular

(WP 0143, Table 3, Item 19)

Wrench, Wheel Lugnut (WP 0143,

Table 3, Item 27)

Wrench, Adjustable (WP 0143,

Table 3, Item 25)

Personnel Required

Operator and Assistant - - - (2)

PREPARE VEHICLE

1.

Shut off engine. (WP 0052)

WARNING

Park vehicle in safe area, out of traffic, where there is no danger to

personnel changing tire assembly. Park vehicle on hard level ground.

Failure to comply may result in injury or death to personnel.

2.

Turn on emergency flashers. (WP 0072)

3.

Set up emergency marker kit, as necessary. (WP 0095)

END OF TASK

SET UP TIRE DAVIT WINCH

1.

Remove hoist arm (1) from mounting bracket (2).

TM 9-2320-430-10

0136

0136-1