DISCONNECT
- Continued
NOTE
After lowering disabled vehicle, extend lift and tow cylinders
approximately 2 to 4 in. (50 to 100 mm) to allow for adjustment when
removing adapters.
4.
Prepare retrieval system for operation (WP 0059) and pull LIFT CYLINDER control
lever (4) and lower disabled vehicle to ground until safety chains at front axle are slack.
4
Figure 24.
WARNING
If disabled vehicle's parking brake is inoperative, chock wheels of
disabled vehicle (refer to operator's manual). Failure to comply may result
in injury or death to personnel.
5.
Engage PARKING BRAKE on disabled vehicle (refer to operator’s manual).
6.
Remove tow light cable (5) from wrecker.
TM 9-2320-431-10-1
0067
0067-21