TM-9-2320-431-10-1

TRUCK, WRECKER, 8X8, M984A1

TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 1 OF 2

JUNE 2009

TM-9-2320-431-10-1 - Page 674 of 1244

HOOKUP - Continued

WARNING

Driveshafts can weigh up to 100 lbs (45 kg). Properly support driveshafts

when removing screws. After screws and brackets are removed,

driveshaft can fall. Failure to comply may result in injury or death to

personnel.

NOTE

•

To remove driveshaft screws, use wrench located in PLS BII stowage

box.

•

Driveshaft ends at No. 2 axle and transfer case are removed the

same way.

35.

Support No. 2 axle driveshaft (41) while assistant removes four screws (42) and two

brackets (43).