TM-9-2320-431-10-1

TRUCK, WRECKER, 8X8, M984A1

TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 1 OF 2

JUNE 2009
TM-9-2320-431-10-1

  TM-9-2320-431-10-1 - Page 945 of 1244

OPERATOR MAINTENANCE
PORTABLE WORK LAMP OPERATION
INITIAL SETUP:
Not Applicable
INSTALL/OPERATE/REMOVE PORTABLE WORK LAMP
1.
Remove work lamp (1) and work lamp harness (2) from stowage.
1
5
4
2
3
Figure 1.
2.
Mount lamp (1) on vehicle using magnet (3).
3.
Install work lamp harness plug (4) on work lamp terminal (5).
4.
Route work lamp harness (2) through driver side door opening (6), between inside of
cab roof (7) and air horn valve hoses (8).
TM 9-2320-431-10-1
0086
0086-1


Back to Top