TM-9-2320-431-10-1
TRUCK, WRECKER, 8X8, M984A1
TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 1 OF 2
JUNE 2009
TM-9-2320-431-10-1 - Page 965 of 1244
OPERATOR MAINTENANCE
OPERATE CLEARANCE LIGHTS
INITIAL SETUP:
Not Applicable
TURN CLEARANCE LIGHTS ON/OFF
CAUTION
Failure to place light switches in the OFF position when vehicle is not in
use may cause battery and/or vehicle damage.
1.
Lift up and hold UNLOCK lever (1).
JACOBS
CAUTION
ENGINE BRAKE
3
1
2
Figure 1.
2.
Set lighting control lever (2) to either STOP LIGHT or SER DRIVE position.
3.
Release UNLOCK lever (1).
4.
Set CL LPS switch (3) to on position. Clearance lights (4) will illuminate.
TM 9-2320-431-10-1
0092
0092-1
Back to Top
