TM-9-2320-431-10-1

TRUCK, WRECKER, 8X8, M984A1

TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 1 OF 2

JUNE 2009

TM-9-2320-431-10-1 - Page 979 of 1244

OPERATOR MAINTENANCE

REAR BEACON LIGHT OPERATION

INITIAL SETUP:

Not Applicable

SET UP REAR BEACON LIGHTS

NOTE

•

Beacon lights should remain in raised position except for crane

operations.

•

Driver side and passenger side beacon lights are set up in the same

way.

1.

Remove two nuts (1), lockwashers (2), washers (3), and screws (4) from support

bracket (5).

Figure 1.

CAUTION

Do not let beacon drop when raising it to operating position. Damage to

beacon can result.

2.

Raise beacon support tube (6) until lower set of holes in beacon support tube align

with holes in support bracket (5).

TM 9-2320-431-10-1

0096

0096-1