TM-9-2320-431-10-2
TRUCK, WRECKER, 8X8, M984A1
TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 2 OF 2
JUNE 2009
TM-9-2320-431-10-2 - Page 146 of 712
6.
MANUAL CONTROL
STATION
Figure 6.
CONDITION/INDICATION
Do controls stick in engaged position after running engine for 20 minutes?
DECISION
No - Test 6 - Hydraulic fluid overheated.
Yes - Problem corrected.
TEST 6 - Hydraulic fluid overheated.
WARNING
Reservoir may be very hot. Use care when placing hand near reservoir.
Reservoir can become hot enough to cause serious burns. Be careful not
to touch the reservoir with bare hands or allow body to contact reservoir.
Use gloves and insulated pads as necessary. Failure to comply may
result in injury or death to personnel.
1.
Set PTO ENGAGE switch to OFF.
2.
Shut off engine. (Volume 1, WP 0057)
3.
Allow hydraulic oil to cool.
TM 9-2320-431-10-2
0153
0153-8
Back to Top
