TM-9-2320-431-10-2
TRUCK, WRECKER, 8X8, M984A1
TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 2 OF 2
JUNE 2009
TM-9-2320-431-10-2 - Page 337 of 712
Table 1.
PMCS - DURING - Continued
Item
No.
Interval
Item to
be
Checked
or
Serviced
Procedure
Equipment
Not Ready/
Available If:
POWER
SWITCH
LATCH
SWITCH
HIGH IDLE
CONTROL SWITCH
ON/OFF POWER SWITCH
Figure 11.
c.
Set POWER switch to ON
position.
d. Set HIGH IDLE CONTROL
switch to CONTINUOUS.
WARNING
Excessive noise levels are
present any time the heavy-
duty winch, crane, or retrieval
system is operating. Wear
single hearing protection
(earplugs or equivalent) while
working around equipment
when it is running. Failure to
TM 9-2320-431-10-2
0183
0183-15
Back to Top
