TM-9-2320-431-10-2

TRUCK, WRECKER, 8X8, M984A1

TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 2 OF 2

JUNE 2009

TM-9-2320-431-10-2 - Page 403 of 712

Table 1.

PMCS - AFTER - Continued

Item

No.

Interval

Item to

be

Checked

or

Serviced

Procedure

Equipment

Not Ready/

Available If:

crane was used during mis-

sion.

28

After

Material

Handling

Crane (if

used)

1. Inspect crane for loose nuts and

screws, hydraulic leaks, damage

to hydraulic hoses and lines, and

obvious damage.

Class III

leak or dam-

aged hoses,

lines, or fit-

tings.

NOTE

For more information on ma-

terial handling crane operat-

ing instructions, refer to grove

crane operation (manual con-

trol) procedures. (Volume 1,

WP 0106)

2. Check that crane hydraulic

system is operable as follows:

a. Start engine. (Volume 1,

WP 0044)

b. Set PTO ENGAGE switch to

ON position. PTO indicator

light will illuminate.

TM 9-2320-431-10-2

0184

0184-35