TM-9-2320-431-10-2

TRUCK, WRECKER, 8X8, M984A1

TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 2 OF 2

JUNE 2009

TM-9-2320-431-10-2 - Page 599 of 712

OPERATOR MAINTENANCE

CHANGE WHEEL AND TIRE ASSEMBLY

INITIAL SETUP:

Tools and Special Tools

Chocks, Wheel (2) (WP 0201, Table 3,

Item 27)

Extension, Handle (WP 0201, Table 3,

Item 39)

Handle, Wrench (WP 0201, Table 3,

Item 41)

Jack, 12-ton, With Handle (WP 0201,

Table 3, Item 52)

Jack, Base Plate (WP 0201, Table 3,

Item 66)

Tools and Special Tools - Continued

Warning Device Set, Triangular

(WP 0201, Table 3, Item 68)

Wrench, Wheel Lugnut (WP 0201,

Table 3, Item 99)

Wrench, Adjustable (WP 0201,

Table 3, Item 95)

Personnel Required

Operator and Assistant - - - (2)

PREPARE VEHICLE

1.

Shut off engine. (Volume 1, WP 0057)

WARNING

Park vehicle in safe area, out of traffic, where there is no danger to

personnel changing tire assembly. Park vehicle on hard level ground.

Failure to comply may result in injury or death to personnel.

2.

Turn on emergency flashers. (Volume 1, WP 0099)

3.

Set up emergency marker kit, as necessary. (Volume 1, WP 0128)

END OF TASK

SET UP TIRE DAVIT WINCH

1.

Remove hoist arm (1) from mounting bracket (2).

TM 9-2320-431-10-2

0192

0192-1