TM-9-2320-432-10

TRUCK, CARGO, 8X8, M985

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-432-10 - Page 271 of 1076

JACK OUTRIGGERS - Continued

•

Crane movement from one lever may be slower than the other when

operating two levers together.

1.

Simultaneously move left-hand (1) outrigger jack (LH O/R JACK) and right-hand (2)

outrigger jack (RH O/R JACK) control levers to DOWN position.

2

1

3

4

Figure 10.

NOTE

Vehicle weight should be off No. 4 axle just enough so tires still have firm

contact with ground but no longer bulge from weight of vehicle.

2.

Lower driver side (3) and passenger side (4) outrigger jack cylinders until vehicle

weight is off rear tires.

RAISE BOOM TO OPERATING POSITION

WARNING

Do not operate crane unless outriggers are firmly in place or vehicle could

turn over. Failure to comply may result in injury or death to personnel.

TM 9-2320-432-10

0042

0042-11