TM-9-2320-432-10
TRUCK, CARGO, 8X8, M985
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-432-10 - Page 367 of 1076
OPERATOR MAINTENANCE
PORTABLE WORK LAMP OPERATION
INITIAL SETUP:
Not Applicable
INSTALL/OPERATE/REMOVE PORTABLE WORK LAMP
1.
Remove work lamp (1) and work lamp harness (2) from stowage.
1
5
4
2
3
Figure 1.
2.
Mount lamp (1) on vehicle using magnet (3).
3.
Install work lamp harness plug (4) on work lamp terminal (5).
4.
Route work lamp harness (2) through driver side door opening (6), between inside of
cab roof (7) and air horn valve hoses (8).
TM 9-2320-432-10
0065
0065-1
Back to Top
