TM-9-2320-432-10
TRUCK, CARGO, 8X8, M985
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-432-10 - Page 441 of 1076
WINCH MIRED VEHICLE FORWARD - Continued
11.
Remove pin (6) from clevis (7) and disconnect clevis (7) from tie down ring (8).
WARNING
•
Always wear protective gloves when handling winch cable. Never let
cable run through hands. Frayed cables can cut severely. Failure to
comply may result in injury or death to personnel.
•
Never operate winch with less than five wraps of cable on winch
drum. Failure to comply may result in injury or death to personnel.
12.
Route winch cable (9) around, and over top of winch (10) toward front of vehicle (as
shown).
9
7
10
M977 SHOWN
Figure 6.
13.
Set PTO ENGAGE switch (2) to ON position. Indicator light (3) will illuminate.
TM 9-2320-432-10
0086
0086-5
Back to Top
