TM-9-2320-432-10
TRUCK, CARGO, 8X8, M985
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-432-10 - Page 891 of 1076
Table 1.
PMCS - WEEKLY - Continued
Item
No.
Interval
Item to
be
Checked
or
Serviced
Procedure
Equipment
Not Ready/
Available If:
attached to each outrigger
pad.
from either
end.
WARNING
Keep hands and feet clear of
outrigger jack cylinders. Fail-
ure to comply may result in
injury or death to personnel.
NOTE
Adjust outrigger pad position
as required so rod end will
lower into pad socket.
f.
Move LH O/R JACK control
lever to DOWN position and
lower outrigger jack until rod
end is firmly seated in
outrigger pad. Install
retaining pins.
Outrigger
jack cylin-
der will not
come out or
will not low-
er com-
pletely into
pad.
g. Move RH O/R JACK control
lever to DOWN position and
lower outrigger jack until rod
end is firmly seated in
outrigger pad. Install
retaining pins.
Outrigger
jack cylin-
der will not
come out or
will not low-
er com-
pletely into
pad.
TM 9-2320-432-10
0148
0148-35
Back to Top
