CRANE ELECTRICAL SYSTEM - Continued
The junction box on the crane connects and distributes the various control circuits of the
crane. The HIAB 8108-2CD incorporates five separate boxes instead of one junction box.
Tilt warning, outrigger extended warning, and remote control systems are electronically
controlled.
Tilt Warning System
NOTE
Refer to the crane data plate (on passenger side rear fender) to for HIAB
crane model (8108 or 8108-2/8108-2CD).
All crane electrical functions are routed through the crane junction box (1).
When more than 5 degrees tilt is detected on the 8108 crane-equipped vehicle, a signal is
sent causing the buzzer to pulsate on and off and the lamp to glow steadily.
The tilt sending switch for the 8108-2 crane equipped vehicle is set to actuate when more
than 7 degrees tilt is detected.
3
1
4
2
Figure 2.
This system consists of an amber lamp (2), warning buzzer (3), and tilt sending switch (4).
TM 9-2320-433-10
0016
0016-3