Table 1.
Instrument Panel Controls and Indicators. - Continued
Key
Control/
Indicator
Function
25
LHS OVER
LOAD Indicator
(M1120 only)
Illuminates (yellow) whenever main hydraulic relief valve is
opened during loading or unloading. When light illuminates,
driver will be warned that LHS has reached an overload
condition or that hydraulic system is lifting very near
maximum capacity. OVER LOAD indicator will come on any
time main relief valve is cracked open, therefore, load or
unload operation may not come to a complete stop, but light
will come on momentarily. This situation would indicate that
system is lifting near maximum capacity. If the LHS is
overloaded, the light illuminates and the system is
automatically blocked out. Off-load/on-load flatrack, and
attempt second operation. If, during this second attempt, the
LHS shuts down, stop operation and redistribute weight or
reduce payload before attempting load or unload. When
attempting to load/unload Forward Repair System (FRS),
manual procedures must be followed or LHS overload system
will shut down the LHS system.
26
LHS Indicator
(M1120 only)
Illuminates (green) when Hydraulic Selector Switch is in
AUTO, MAN H.A., or MAN M.F. positions.
END OF WORK PACKAGE
TM 9-2320-433-10
0021
0021-6