TM-9-2320-433-10

TRUCK, CARGO, GUIDED MISSILE TRANSPORTER (GMT), 8X8, M985E1

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

  TM-9-2320-433-10 - Page 185 of 964

OPERATOR MAINTENANCE
HIAB CRANE REAR CONTROLS AND INDICATORS
WARNING
Do not allow air pressure drop below 30 psi (207 kPa). On vehicles with
automatic parking brake valve, parking brakes will automatically apply
when air pressure drops below 30 psi (207 kPa). Warning buzzer sounds
when air pressure drops below 60 psi (414 kPa). Failure to comply may
result in injury or death to personnel.
CONTROLS AND INDICATORS INTRODUCTION
This section displays the location and describes the use of HIAB Crane rear controls and
indicators which are used in the operation of HEMTT series vehicles. Controls and
indicators described in this section are the same for all vehicles, except where otherwise
indicated.
LOCATION AND USE OF CONTROLS AND INDICATORS
NOTE
The HEMTT M985 E1 may be equipped with either the 8108 or 8108-2
HIAB crane. Refer to data plate on passenger side rear fender (above
mud flap) for vehicle configuration.
Know the location and proper use of every control and indicator before operating HEMTT
series vehicles. Separate illustrations with keys are provided for learning about HIAB Crane
rear controls and indicators.
LOCATION AND USE OF CONTROLS AND INDICATORS
NOTE
The HEMTT M985A4 GMT is equipped with the 8108-2CD HIAB crane.
The differences between the 8108-2CD and 8108/8108-2 HIAB cranes
are noted throughout this work package.
Know the location and proper use of every control and indicator before operating HEMTT
series vehicles. Separate illustrations with keys are provided for learning about HIAB Crane
rear controls and indicators.
TM 9-2320-433-10
0027
0027-1


Back to Top