Table 1.
PMCS - DURING - Continued
Item
No.
Interval
Item to
be
Checked
or
Serviced
Procedure
Equipment
Not Ready/
Available If:
3
During
Instrume
nts
Monitor all gauges, indicators, and
warning lights for proper reading and
operation while operating vehicle.
Gauges, in-
dicators,
and warning
lights do not
read/oper-
ate proper-
ly.
4
During
Transmis
sion
Check transmission for proper
operation. (WP 0045)
Transmis-
sion slips or
will not shift.
5
During
Steering
Be alert for any unusual noise,
binding, or difficulty in steering during
operation.
Steering
binds or is
unrespon-
sive.
6
During
Service
Brakes
Be alert for chatter, noise, and side
pull.
Service
brakes do
not operate
properly.
NOTE
•
PMCS for material
handling crane should
only be performed when
material handling crane is
required for mission.
•
Engine must be running
to perform this check.
7
During
Material
Handling
Crane
1. Check crane for loose parts,
hydraulic leaks, and damage to
hydraulic hoses and lines.
Class III
leak
present,
loose/dam-
aged parts
TM 9-2320-433-10
0129
0129-3