OPERATOR MAINTENANCE
CLEAN VEHICLE
INITIAL SETUP:
Materials/Parts
Rag, Wiping (WP 0147, Table 1,
Item 50)
Equipment Condition
Engine OFF. (WP 0054)
Wheels chocked. (WP 0074)
CLEAN EXTERIOR
CAUTION
Do not wipe dirt off vehicle when vehicle is dry. Dirt, stones, or debris may
scratch and damage vehicle.
NOTE
After a thorough high pressure washing, lubricate all grease fittings and
oil can points outside and underneath vehicle (refer to lubrication
instructions (WP 0134) for more information).
1.
Wash vehicle often with cool or warm water. Do not use strong detergent or abrasives.
Figure 1.
2.
While cleaning vehicle, look closely for rust, corrosion, bare metal, or other damage.
Report any damage to Field Level Maintenance.
END OF TASK
CLEAN INTERIOR
1.
Remove loose dirt and dust from cab interior components (1).
2.
Clean seat cushions (2) and seatbelts (3) with warm soapy water. Do not use
abrasives or solvents.
TM 9-2320-433-10
0137
0137-1