TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 346 of 1324

LOADING - Continued

46.

Release joystick (10).

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or

damage to equipment may result.

47.

Turn hydraulic selector switch (9) to AUTO. Resume normal AUTO operations.

NOTE

Engine speed may be increased and decreased to ease loading.

48.

After container (6) contacts rear sliders (23), increase engine speed to approximately

1500 rpm until container is almost loaded. Reduce engine speed to idle.

CAUTION

After loading operations using CHU kit and container are complete, and

the LHS NO TRANSIT indicator goes out, operator must release the

joystick from LOAD position. Failure to release joystick may cause LHS

OVER LOAD indicator to illuminate and hydraulic cylinders to remain

active forcing a temporary bow in the LHS frame, resulting in contact

between LHS and container.

49.

Continue loading until container (6) is fully loaded and LHS NO TRANSIT indicator

(29) goes out.

TM 9-2320-434-10

0054

0054-22