TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 388 of 1324

LOADING - Continued

48.

Move joystick (10) to LOAD until container (6) is approximately 2 ft. (61 cm) off the

ground. Release joystick (10).

49.

Release joystick (10).

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or

damage to equipment may result.

50.

Turn hydraulic selector switch (9) to AUTO. Resume normal AUTO operations.

NOTE

Engine speed may be increased and decreased to ease loading.

51.

After container (6) contacts rear sliders (21), increase engine speed to approximately

1500 rpm until container is almost loaded. Reduce engine speed to idle.

CAUTION

After loading operations using CHU kit and container, and LHS NO

TRANSIT indicator goes out, operator must release the joystick from the

LOAD position. Failure to release the joystick may cause LHS OVER

LOAD indicator to illuminate and hydraulic cylinders to remain active

forcing a temporary bow in the LHS frame, resulting in contact between

LHS and container.

52.

Continue loading until container (6) is fully loaded and LHS NO TRANSIT lamp (27)

goes out.

TM 9-2320-434-10

0055

0055-22