TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 432 of 1324

LOADING - Continued

•

Hydraulic selector switch must be in the OFF position before driving

vehicle, or hydraulic system could overheat.

55.

Turn hydraulic selector switch (9) to OFF.

56.

Set PTO ENGAGE switch (7) to OFF position. Indicator light (8) will go out.

57.

Shut off engine. (WP 0051)

NOTE

•

If container is not centered, and transit locks cannot be installed and

pinned, repeat Steps (44) through (57) to reposition container.

•

There are two rear container locks. Passenger side shown.

58.

Support rear container lock (2) and remove lock pin (28) and pin (29).