TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 453 of 1324

FRONT LIFT ADAPTER (FLA) IN UNLOCKED POSITION (LOAD/UNLOAD

CONTAINER, INSTALL/REMOVE FRONT LIFT ADAPTER FROM LHS) - Continued

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or

damage to equipment may result.

4.

Turn hydraulic selector switch (5) to AUTO.

5.

Move joystick (6) to UNLOAD position, and raise FLA (7) approximately 2 in. (5.08

cm).

6.

Shut off engine. (WP 0051)

WARNING

Front lift adapter weighs 1,600 lbs (727 kg). Do not attempt to lift or move

front lift adapter without the aid of an assistant and a lifting device. Failure

to comply may result in injury or death to personnel.

NOTE

There are two locking plates on FLA. Both locking plates are locked and

unlocked the same way. Passenger side shown.

7.

Remove quick release pin (8) from bracket (9) holding locking plate (10) over LHS

arm pivot pin (11).

8.

Rotate locking plate (10) up to disengage LHS hook arm pivot pin (11).

TM 9-2320-434-10

0057

0057-5