TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 473 of 1324

LOADING ISO CONTAINER - Continued

WARNING

Do not stand between CROP and ISO container. Ensure all personnel

stand clear of CROP when CROP is being moved. Failure to comply may

result in injury or death to personnel.

CAUTION

M3 CROP is designed to fit into door opening of 91 in. (231 cm). If

container is more than 10 years old, door opening may not be wide

enough. DO NOT attempt to force CROP into containers with door

openings less than 91 in. (231 cm). Failure to comply will result in damage

to equipment.

NOTE

•

Several attempts to insert CROPs may be required because ISO

container door opening is only slightly wider than CROP.

•

If CROP load is too tall to insert into ISO container according to Steps

(5) and (6), perform Steps (7) through (9), then proceed to Step (10).

5.

Using at least one ground guide, carefully back vehicle up and insert rear of CROP

(2) approximately 2 ft. (61 cm) into ISO container (4).