TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 748 of 1324

WINCH MIRED VEHICLE TO THE REAR - Continued

54.

Release tension pulley lever (14).

55.

Pull winch cable (9) forward and out of cable guide (11).

56.

Set PTO ENGAGE switch (2) to ON position. Indicator light (3) will illuminate.

3

2

4

9

8

7

6

5

10

M977 SHOWN

Figure 32.

57.

Move winch shift lever (4) to IN position to reel in cable while assistant guides winch

cable (9) to tie down ring (8).

58.

When clevis (7) is approximately 2 ft. (61 cm) from winch (10), release winch shift

lever (4) to center position.

59.

Assistant connects clevis (7) to tie down ring (8) with pin (6) and cotter pin (5).

TM 9-2320-434-10

0099

0099-36