TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 873 of 1324

OPERATOR MAINTENANCE

MANUAL REMOVAL OF FLATRACK

INITIAL SETUP:

Personnel Required

Operator and Assistant - - - (2)

REMOVE FLATRACK WITH LIFTING DEVICE

WARNING

M1077 flatrack weighs 3,200 lbs (1 455 kg). M1077A1 flatrack weighs

3,900 lbs (1 773 kg). Do not attempt to lift or move flatrack without the aid

of an assistant and a lifting device. Failure to comply may result in injury

or death to personnel.

CAUTION

•

Do not attempt to LOAD flatrack onto vehicle in this manner or

equipment damage may result.

•

Attempting to unload flatrack with LHS rear load locks engaged will

result in damage to flatrack and possible damage to LHS.

•

Flatrack must be empty before attempting to reengage hook and

hook bar or damage to equipment may result.

NOTE

•

If complete system failure or hydraulic failure as described in this

paragraph does not allow normal operation, remove payload or

flatrack and payload from vehicle.

•

Flatrack is considered engaged in LHS rear load locks when any part

of flatrack lock is under LHS lock.

1.

Secure lifting slings to flatrack lifting eyes (1).

////////////////////////////////////////////////////////////////////////////////////

TM 9-2320-434-10

0121

0121-1

////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////