POST TOWING PROCEDURE
NOTE
•
This post towing procedure is applicable to a HEMTT series vehicle
that has been towed from the front ONLY (refer to tow HEMTT-front
lift for further information).
•
If disabled vehicle is either a BASE or A2 model HEMTT series
vehicle (refer to data plate on inside of driver side door), complete
Step (1).
•
If disabled vehicle is an A4 model HEMTT series vehicle (refer to data
plate on inside of driver side door), skip to Step (2).
1.
Perform the following to disabled vehicle:
a.
Remove two axle restraint chains (1) from around frame rails (2) and No. 2 axle
(3).