TM-9-2320-435-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8, M1977

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-435-10 - Page 1080 of 1168

REMOVE WHEEL AND TIRE ASSEMBLY - Continued

8.

Using jack (1), lower vehicle until flat wheel and tire assembly (7) is just touching

ground.

9.

Tilt top of flat wheel and tire assembly (7) forward, while assistant raises jack (1)

slightly. Wheel and tire assembly (7) should move forward.

10.

Repeat Steps (8) and (9) to walk flat wheel and tire assembly (7) off studs (8).

11.

Remove flat wheel and tire assembly (7) and lean flat wheel and tire assembly against

vehicle.

END OF TASK

INSTALL WHEEL AND TIRE ASSEMBLY

NOTE

Tire tread is non-directional. Vehicle operation is not affected by direction

of traction bars.

1.

With aid of an assistant, roll wheel and tire assembly (1) up to axle (2).